Battery Charging - BRAYER BR4265 Instruction Manual

8 EN
place until the lock (15) (pic.1) clicking.
Attaching the extension pipe
• Insert the extension pipe (8) into the vacuum cleaner
air inlet untilthe clamp (7) clicking (pic.2).
• Connect the electric brush (10) to the extension pipe
(8) (pic.3).
• To detach the extension pipe (8) from the vacuum
cleaner press and hold the clamp (7).
• To detach the electric brush (10) from the extension
pipe (8) press and hold the clamp (9).
Electric brush
• Use the electric brush (10) for cleaning rooms with
smooth floors or carpets with medium and low pile.
Notes:
– do not use the electric brush (10) if the pile length
exceeds 15 mm.
– do not run the electric brush (10) over electric wires.
UNIVERSAL NOZZLE
• The Universal Nozzle (23) is intended for cleaning
radiators, crevices, and so on; as well as for
dedusting furniture surfaces. The fibers on the brush
prevent damage to the polished furniture surfaces.
When using the Vacuum Cleaner, install the Nozzle
(23) into the necessary position by pressing the Lock.
• You can attach the crevice nozzle (23) to the
extension pipe (8) (pic. 4) or to the air inlet of the
vacuum cleaner (pic. 5).
WALL-MOUNTED HOLDER OF THE VACUUM
CLEANER
• Select the storage place for the vacuum cleaner/the
battery charging. Place the wall-mounted holder (25)
near the mains socket.
• Place the wall-mounted holder (25) so that the vacuum
cleaner does not hang. The vacuum cleaner should
rest on the electric brush (10).
• IMake sure that no electric wiring or other utilities is
inside the selected wall area before drilling orifices in
it.
• Unscrew the two mounting screws, plug the Power
Adapter (24) jack into the Wall Mount, and reinstall the
Wall Mount, screw in the mounting screws (Fig. 7).
• Fasten the wall-mounted holder (25) with dowels and
fastening screws.

BATTERY CHARGING

ATTENTION!
– Use only the battery supplied with the unit. Using a
non-original battery can be dangerous.
– Do not expose Li-ion batteries to impacts and high
temperatures. Do not disassemble the battery to avoid
the electrolyte leakage.
– Do not throw the battery into fire.