Table of Contents
Advertisement
1.96
Climate Controller Type 148941 / Type 148942 / Type 148943 / Type 148944
Operation manual
2 Intended Use
The Kampmann Climate Controller type 148941/ type 148942/ type 148943
and type 148944 has been designed in compliance with the state of the art
and recognized safety-related regulations. Nevertheless, its use can result
in danger to people or damage to the units or other material property if it is
not appropriately installed and operated or correctly and properly used.
Applications
The Climate Controller type 148941 / type 148942 / type 148943 / type
148944 should only be used as a Climate Controller in conjunction with
Kampmann systems.
The Climate Controller is solely intended for use indoors (e.g. residential
and commercial properties, showrooms etc.).
The Climate Controller cannot be used
Protect the products from any moisture during installation. Check the
intended use with the manufacturer in case of any doubt. Any other use
than the use specified above is deemed not to be correct and proper. The
operator of the unit is solely responsible for any damage arising as a result
of this. Intended use is deemed to include observing the installation
instructions described in these instructions.
Specialist Knowledge
The installation of this product requires specialist knowledge of heating,
cooling, ventilation and electrical engineering. This knowledge, generally
learned in vocational training in one of the fields mentioned above, is not
described separately. Damage caused by improper installation is the
responsibility of the operator. The installer of these units should have
adequate knowledge of the following gained from specialist vocational
training
Purpose and Scope of these Instructions
These instructions contain information on the commissioning, functionality
and operation of the Kampmann Climate Controller type 148941 / type
148942 / type 148943 / type 148944. The information contained in these
instructions can be changed without prior notification.
•
outdoors
•
in humid areas, such as swimming pools, in wet rooms
•
in areas where there is a risk of explosion
•
in areas with a high dust content
•
in areas with an aggressive atmosphere
•
safety and accident prevention regulations
•
guidelines and recognised technical regulations of the respective
country, i.e. Association of German Electricians (VDE) regulations,
DIN and EN standards
4
Advertisement
Table of Contents
