Timer Settings; Timer Channels - Kampmann 148941 User Manual

1.96
Climate Controller Type 148941 / Type 148942 / Type 148943 / Type 148944
Operation manual

7 Timer Settings

The user menu can be accessed by simultaneously pressing keys (5), (7) and
(8) for a minimum of 3 seconds.
Keys (5), (6), (7) and (8) can be used to navigate through the menu. The
On/Off key confirms the adjustments performed. The user accesses a sub-
menu by navigating to the required menu using keys (5) and (6) and using
key (8) to open it. If the cursor is positioned in the header, key (7) can be used
to open the higher-level menu. The Parameter menu is automatically exited
after 60 seconds with no input. The values are stored if key (7) is used to exit
a sub-menu.

7.1 Timer Channels

There are 3 timer channels each with 4 configurable time segments. Timer
switching channel 3 has the highest priority and timer switching channel 1 the
lowest priority. A base temperature setpoint can be assigned to each timer
segment. There is also an option of enabling ECO mode.
Once the line of the timer channel to be processed has been selected, key (8)
is used to call up the next sub-menu. There is an option of selecting an entire
week, a working week or any period within a week. A starting time, a setpoint
temperature and a fan mode (Off/Auto) can then be prescribed for the 4 different
time segments in the following sub-menus and the ECO-Modbus can be
activated if necessary.
7.2 Timer Settings
The timer settings in the "Time/Date" menu need to be adjusted to use the
timer program. The date and time can be shown in the header of the main
screen by means of appropriate parametrisation. In addition, automatic
changeover between summer and winter time can also be enabled.
The power reserve to store the time and date is dependent on the
operating time of the control panel. The time should therefore be
set at the end of commissioning.
14