Whirlpool WTW5057LW0 Technical Manual page 45

10. Remove the four (4) mounting bolts.
11. Pull the gearcase out of the tub.
As an alternative to the previous steps, the belt, motor, splutch, shifter, and
capacitor may also be removed along with the gearcase as outlined below:
1. Turn off the water supply to the washer.
2. Complete the steps 1-2 from section Removing the Basket.
3. Use cardboard or padding to lay washer on the front cabinet.
4. Unplug the harness from the motor.
5. Unplug the harness from Shifter.
FOR SERVICE TECHNICIAN'S USE ONLY
6. Unplug the harness from the capacitor.
7. Remove the four (4) mounting bolts and pull the gearcase out of the tub.
NOTE: The tub and gearcase has eight (8) mounting holes. Only four (4)
are used. If they strip out during reassembly, the other holes can be used
to re-mount the gearcase.
45