Whirlpool WTW5057LW0 Technical Manual page 44

Removing the Splutch
WARNING
Excessive Weight Hazard
Use two or more people to move and install washer.
Failure to do so can result in back or other injury.
1. Turn off the water supply to the washer.
2. Complete the steps 1-5 from section Removing the Drive Belt and
Motor.
3. Hold the splutch pulley and remove the mounting nut.
4. Lift off the pulley.
5. Complete the steps 1-6 from section Removing the Shifter.
6. Unsnap the tabs that secure the splutch housing and lift off.
44
FOR SERVICE TECHNICIAN'S USE ONLY
Removing the Gearcase
WARNING
Excessive Weight Hazard
Use two or more people to move and install washer.
Failure to do so can result in back or other injury.
1. Turn off the water supply to the washer.
2. Complete the step 1 from section Removing the Impeller.
3. Complete the steps 1-2 from section Removing the Basket.
4. Use cardboard or padding to lay washer on the front cabinet.
5. Complete the steps 1-5 from section Removing the Drive Belt and
Motor.
6. Complete the steps from 1-6
7. Complete the steps 1-6 from section Removing the Shifter.
8. Remove the capacitor by disconnecting harness and removing
mounting screws as shown in below figures.
9. Complete the steps 1-7 from section Removing the Drain Pump.
Removing the Splutch.