Specifications - Culligan Aquasential Select Plus Iron-OX5 Installation, Operation And Service Instructions

Specifications

Culligan Aquasential Select Plus Iron-OX5 & Sulfur-OX3 Filters
Control Valve
Overall Conditioner Height
Media Tank Dimensions (D x H)
Filter Media Type
Underbedding
G-50
Cullsan U
Cullsan
Capacity¹
Freeboard²
Max. Clear Water (Soluble) Iron
Rated Hydrogen Sulfide
Max. Hydrogen Sulfide⁵
Minimum Alkalinity
pH for Iron Removal³
pH for Hydrogen Sulfide Removal⁶
Service Flow @ Pressure Drop (Clean Bed)
Normal
Maximum⁴
Operating Pressure
Operating Temperature
Electrical Requirements
Power Consumption, Continuous/Maximum
Drain Flow
Reconditioning Time
Backwash
Air Draw
Fast Rinse
¹ Capacity based on 4 gpm and 5 mg/L of dissolved iron for Iron-OX5 and 4 gpm and 3 mg/l of hydrogen sulfide for Sulfur-OX3.
² Measure from top of media bed to top of inlet fitting.
³ Not recommended for Hydrogen Sulfide removal.
⁴ Max flow rates and pressure drop characteristics have not been validated by the Water Quality Association. The maximum
specified flow rate as validated by the Water Quality Association is defined as normal service flow.
⁵ Not validated by Water Quality Association - based on Culligan International lab testing
⁶ Not recommended for iron removal.
Culligan Aquasential Select Plus & Select Series Iron-OX5 & Sulfur-OX3 Water Filters 01040683
10ʺ Iron-OX5 Outdoor
1" reinforced thermoplastic with
Accusoft electronics
67"
10" x 54"
1.0 ft³ Birm
35 lb
25 lb
—
500 gallons
21"
5 ppm
not rated
not rated
100 ppm
7.0 - 8.5
—
4 gpm @ 5 psi
6 gpm @ 9 psi
20-60 psi
33-120° F (1-48° C)
24 Volts/60 Hz
3 Watts/10 Watts
5.5 gpm
15 minutes
40 minutes
5 minutes
10ʺ Sulfur-OX3 Outdoor
1" reinforced thermoplastic with
Accusoft electronics
67"
10" x 54"
1.0 ft³ Cullar S
—
—
20 lbs.
500 gallons
29"
not rated
1 ppm
3 ppm
100 ppm
—
7.0 - 8.5
4 gpm @ 2.9 psi
6 gpm @ 9 psi
20-60 psi
33-120° F (1-48° C)
24 Volts/50-60 Hz
3 Watts/10 Watts
5.5 gpm
15 minutes
40 minutes
5 minutes
Specifications 6