Culligan AQUA-CLEER BXL Series Installation And Operating Instructions Manual
Culligan AQUA-CLEER BXL Series Installation And Operating Instructions Manual

Culligan AQUA-CLEER BXL Series Installation And Operating Instructions Manual

Advertisement

Quick Links

Cat. No. 01881997
Rev. D 1/24/01
DCO#1521
Installation
and
Operating
Instructions
AQUA-CLEER
®
SERIES BXL
and BXL PLUS
WATER TREATMENT
SYSTEMS
MODELS FROM JUNE 2000
MG10 R/O WATER FILTRATION SYSTEM
©2001 Culligan International Company
Printed in USA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AQUA-CLEER BXL Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Culligan AQUA-CLEER BXL Series

  • Page 1 Cat. No. 01881997 Rev. D 1/24/01 DCO#1521 Installation Operating Instructions AQUA-CLEER ® SERIES BXL and BXL PLUS WATER TREATMENT SYSTEMS MODELS FROM JUNE 2000 MG10 R/O WATER FILTRATION SYSTEM ©2001 Culligan International Company Printed in USA...
  • Page 2 We encourage Culligan users to learn about Culligan products, but we believe that product knowledge is best obtained by consulting with your Culligan dealer. Untrained individuals who use this manual assume the risk of any resulting property damage or personal injury.
  • Page 3 Installation Operating Instructions AQUA-CLEER ® SERIES BXL and BXL PLUS WATER TREATMENT SYSTEMS MODELS FROM JUNE 2000 Table of Contents Page Introduction ............... 2 Specifications ............5 Installation ..............6 Operation ..............14 Service and Maintenance ......... 16 Parts List ..............24 Electrical Schematic ..........
  • Page 4 SERIAL NUMBERS The Culligan Series BXL system has two serial number labels, one for the entire plumbing assembly and one for the RO module assembly. The plumbing assembly serial number label is located on the top right-side of the panel. The RO module serial number is located on the modules.
  • Page 5 to pass through it and not the others. In osmosis, there is a tendency for a liquid to go from an area of less concentration to an area of more concentration through a semi-permeable membrane. Figure 1 shows the osmotic process.
  • Page 6 * Short term cleaning is acceptable for pH ranges between 2.0 and 12.0. Additional treatment is required when chloramines are present and the pH levels exceed 9.0. NOTICE: In some applications, a water softener is not required. Consult the independently operated Culligan dealer for further information on these special applications.
  • Page 7: Specifications

    Specifications SERIES BXL/BXL PLUS SPECIFICATIONS B-2XL B-3XL B-4XL Dimensional, Pump Assembly Width - in [mm] 32 [813] Depth - in [mm] 13 [330] Height - in [mm] 11 [280] Dimensional, Module Assembly Width - in [mm] 42 [1067] Depth - in [mm] 6 [153] Height - in [mm] 17 [432]...

This manual is also suitable for:

Aqua-cleer bxl plus series

Table of Contents