Configuring Wan - Nokia 7368 Product Manual

Configure a G-2426G-A indoor ONT
Network configuration

Configuring WAN

Table 7-10 LAN IPv6 parameters
Field
IPv6 LAN Host Configuration
DNS Server
Prefix Config
Interface
DHCPv6 Server Pool
DHCP Start IP Address
DHCP End IP Address
Whether the address info through
DCHP
Whether other info obtained
through DHCP
Maximum interval for periodic RA
messages
Minimum interval for periodic RA
messages
3
Click Save/Apply.
E
ND OF STEPS
7.17 Configuring WAN
1
Click Network WAN from the left pane in the GPON Home Gateway page. The WAN page
displays.
September 2020
Issue 1
Description
Select a DNS server from the list.
Select a prefix config option from the list, either WANConnection (prefix will be obtained from the
WAN) or Static (enables you to enter the prefix).
This field appears if you selected the Wan Connection option for the "prefix config" field. Select a
WAN connection interface from the list.
Enter the starting DHCP IP address.
Enter the ending DHCP IP address.
Select this checkbox to enable address information retrieval through DHCP.
Select this checkbox to enable retrieval of other information through DHCP.
Enter the maximum interval (in seconds) for periodic Router Advertisement messages. The
interval range is from 4 to 1800.
Enter the minimum interval (in seconds) for periodic Router Advertisement messages. The
interval range is from 4 to 1800.
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
7368 ISAM ONT
93