Nokia 7368 Product Manual page 63

Replace a G-2426G-A indoor ONT
Procedure
1
Deactivate the ONT services at the P-OLT.
If you are using the SLID feature, this step is not required. The ONT and the services can
remain in service (IS).
a. Use the RTRV-ONT command to verify the ONT status and th associated services. Record
the serial number or the SLID of the ONT displayed in the command output.
Example:
RTRV-ONT::ONT-1-1-1-1-1;
b. If the ONT is in service, place the ONT in OOS state.
Example:
ED-ONT::ONT-1-1-1-1-1;
2
If used, disable the Wi-Fi service by pressing the WLAN button; see
indoor ONT connections" (p. 62)
Figure 6-1 G-2426G-A indoor ONT connections
September 2020
Issue 1
for the location of the WLAN button.
USB TEL1 TEL2 LAN1 LAN2 LAN3
USB POTS port Ethernet ports (4)
port (RJ-11) (RJ-45)
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
Figure 6-1, "G-2426G-A
WPS LED
LAN4 POWER WLAN RESET ON/OFF
On/off
button
Reset
button
Power
Wi-Fi
security/
on/off buttons
7368 ISAM ONT
36176
63