Nokia 7368 Product Manual page 122

Configure a G-2426G-A indoor ONT
Network configuration
Configuring QoS
2
Configure the following parameters:
Table 7-22 QoS Config parameters
Field
QoS Setting
Type
Classification Criteria
Source MAC
Interface
Classification Result
DSCP Remark
802.1p Remark
Forwarding Policy
Additional fields for L3
Protocol
Application
Source IP and Source IP
Mask
Destination IP and
Destination IP Mask
Source Port and Source
Port Max
Destination Port and
Destination Port Max
3
Click Add to add a QoS policy.
E
ND OF STEPS
122
Description
Select a QoS service layer type from the list: L2 or L3.
Enter the source MAC
Select the Exclude checkbox to exclude the source MAC address.
Select an interface from the list.
Enter the value for the DSCP mark (range: 0-63); valid only for L3 Criteria.
Enter the value for the 802.1p (range: 0-7).
Enter the number for the forwarding policy (range: 1-7).
Select a protocol from the list, or select the Exclude checkbox.
Select an application from the list.
Enter the values for the source IP and IP mask, or select the Exclude checkbox.
Enter the values for the destination IP and IP mask, or select the Exclude checkbox.
Enter the values for the source port and port max (highest port number) or select the Exclude checkbox.
Enter the values for the destination port and port max (highest port number), or select the Exclude
checkbox.
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
7368 ISAM ONT
September 2020
Issue 1