Gree sapphire SAP09HP230V1AH Owner's Manual page 14

OPERATION OF WIRELESS REMOTE CONTROLLER (Continued)
DISPLAYING SETPOINT OR INDOOR
TEMPERATURE ON FRONT PANEL:
• The setpoint temperature or room temperature can be
displayed on the front panel. Only setpoint temperature
is displayed on the remote controller.
• When the "TEMP" button is pushed once, the
temperature indicator
that the setpoint temperature is displayed on the front
panel.
• When the "TEMP" button is pushed a second time, the
display will show an
a house. This indicates that the room temperature is
displayed on the front panel.
• The room temperature will be displayed for only 5
seconds before reverting back to displaying room
setpoint.
NOTE:
• Only room setpoint temperature will be displayed on
the remote controller.
WiFi
• Press and hold both the"Mode"and"Turbo" buttons
for 10 seconds until the unit beeps for the second
time and the WiFi icon appears on the display.
Repeat the procedure to turn WiFi mode OFF. See
"WiFi SETUP"section for more information.
TURBO
• The desired setpoint, either in heating or cooling,
can be achieved faster if TURBO mode is used. After
selecting the"HEAT" or "COOL" mode button, push
the "TURBO" button. The TURBO
displayed on the remote controller and the unit will
run at ultra high speed fan. To deactivate the feature,
push the "TURBO" button again. The unit will return
to normal operation.
V IREO G E N 3 OW N ERS M A N UA L - I N D OOR U N I T
is displayed. This indicates
icon with a thermometer inside
icon will be
QUIET
• Sapphire's QUIET MODE function delivers quiet
comfort to your room. Press QUIET button to activate
QUIET MODE in heating or cooling mode. The QUIET
icon will be displayed on the remote controller.
The unit operates normally for ten (10) minutes or
until room setpoint temperature is reached. Then the
Sapphire system will operate quietly at Low fan speed.
• Press QUIET button again to cancel QUIET MODE.
NOTE:
• QUIET MODE cannot be selected in DRY or FAN
ONLY modes.
ENERGY SAVING MODE
• The Sapphire System will not only keep you
comfortable, they will also save you money over the
long run. Energy Saving mode will automatically
select the optimal fan speed to save energy in COOL
mode. The fan will automatically slow down he closer
the room temperature is to the setpoint. Press TEMP
and CLOCK simultaneously to activate Energy Saving
mode. The remote controller will display "SE". Press
TEMP and CLOCK simultaneously to cancel Energy
Saving Mode.
| 14