Product Introduction; System Diagram - Redx RX Series User Manual

2.1 System Diagram

The RX-2505PW system uses the grid and battery to ensure the continuous power supply to important
loads. The system allows users to store the energy from grid into the battery, and send the stored energy
to the grid when needed. It can also provide backup power during a power outage.
Solar
Wind
Figure 2-1 shows the application of the RX-2505PW all-in-one energy storage system. RX-2505PW contains
the inverter and battery storage modules. It is important to keep the installation environment well ventilated
and take necessary measures to control the ambient temperature to avoid the risk of explosion caused by
excessive battery temperature.
Rev 20221130
The product is not tested to section 5 of AS/NZS 4777.2:2020 and is
not to be used in multiple inverter combinations without additional
considerations by the system designer.
The load capacity of the output of the inverter is as follows:
Inductive load (such as air conditioning, washing machine, motor, etc.) :
Single maximum power 1.5kVA, total inductive load maximum power
2.5kVA (with grid power).
Capacitive load (e.g. computer, switching power supply, etc.) :
The maximum power of the total capacitive load is 1.5kVA (without grid
power), The maximum power of the total capacitive load is 2.5KVA(with
grid power).

2 Product Introduction

Switchboard
Back-up
appliances
Warning!
Warning!
Main Switch
Cloud monitoring
and control
RX2505PW
Utility Meter
Page 3 of 35
Grid