Redx RX Series User Manual page 19

RX-2505PW AC terminals
Requirements
1.Install an AC circuit breaker between the inverter and the grid before connecting the system to
the grid.
2.Grid voltage and grid frequency should be within the allowable range of inverter operation.
Steps
1. First, prepare the required connecting wires according to the following. It is recommended that
the live wire be red, the ground wire be black, and the safety earth wire be yellow and green.
（A） Core wire
（D） Heat gun
2. Remove the cover of the terminal
Rev 20221130
1
（B） Insulation layer
（E） Hydraulic pliers
RX2505PW
2
GRID/EPS wiring cover
（C）Heat shrink tubing
3. Note the wiring terminals
Page 14 of 35