Installation Procedure; Earth Connection - Redx RX Series User Manual

4.2 Installation Procedure

1. Align the hole template (locating plate) with the ground and place it flat on the wall.
2. Align the hole template on the installation surface and drill holes with a diameter of 8mm and
a depth of 40mm on the wall.
3. Install the m6x60 expansion screws into the previously drilled holes.
4. Secure the fixing bracket to the wall using a socket wrench and tighten the expansion bolts.
5. Align the unit with the fixing bracket on the wall and lift the unit on to the bracket by lowering
it into the holes.
6. Prepare the unit for installation of cabling.
1
Hole template
5

4.3 Earth Connection

A secondary protection grounding terminal is added for the system. Ensure that the grounding
resistance is less than 10 Ω and the grounding cable diameter is not greater than 10mm.
Rev 20221130
2
Hole template
RX2505PW
3
Expansion Bolts
Rx-2505PW
Bracket
4
Nut / washer
6
Page 12 of 35
Bracket
2