Set Up Mode
Press any button on the controller's keyboard to activate the controller's IR port. Point your IR dongle (if
using PC) or your Pocket PC's IR port (if using Pocket PC) at the IR window on the front of the controller
®
and then click on the "Start" button. The P.I.E. Tool
should start uploading the configuration information
from the controller as shown below:
Figure 4-4 Configuration Upload in Progress
Once the upload is complete, click on the "Ethernet & Email" Group. Configure your Ethernet and Email
parameters per Section 4.8.
Once you have changed the Ethernet settings and downloaded them to your controller, you will now be
able to communicate with it via Ethernet.
9/06
7866 Triple Range Digital H
and CO
Analyzer/Indicator - Operation and Maintenance
43
2
2