Honeywell 7866 Operation And Maintenance Manual page 2

Copyright, Notices, and Trademarks
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of defective materials and faulty
workmanship. Contact your local sales office for warranty information. If warranted goods are
returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge
those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other
warranties, expressed or implied, including those of merchantability and fitness for a
particular purpose. Specifications may change without notice. The information we supply is
believed to be accurate and reliable as of this printing. However, we assume no responsibility for its
use.
While we provide application assistance personally, through our literature and the Honeywell web
site, it is up to the customer to determine the suitability of the product in the application.
CE Conformity (Europe)
This product is in conformity with the protection requirements of the following European Council Directives:
73/23/EEC, the Low Voltage Directive, and 89/336/EEC, the EMC Directive. Conformity of this product with
any other "CE Mark" Directive(s) shall not be assumed.
Attention
The emission limits of EN 50081-2 are designed to provide reasonable protection against harmful
interference when this equipment is operated in an industrial environment. Operation of this equipment in a
residential area may cause harmful interference. This equipment generates, uses, and can radiate radio
frequency energy and may cause interference to radio and television reception when the equipment is used
closer than 30 meters to the antenna(e). In special cases, when highly susceptible apparatus is used in
close proximity, the user may have to employ additional mitigating measures to further reduce the
electromagnetic emissions of this equipment.
ii 7866 Triple Range Digital H
Printed in U.S.A. – © Copyright 2006 by Honeywell
Revision D – Sept. 2006
Honeywell
Industrial Measurement and Control
1100 Virginia Drive
Fort Washington, PA 19034
and CO Analyzer/Indicator - Operation and Maintenance
2 2
9/06