Advertisement
2.
Remove the nut, bolt, compression spring,
and spacer that secures the throttle arm to the
handle
(Figure
4).
Figure 4
1. Throttle hardware
2. Wire-harness connection
3.
Remove any wire-harness connections to the
switches on the handle
4.
Remove the 2 screws that secure the bail
brackets to the handle
5.
Remove the bolts and nuts that secure the
handle to the handle mount
remove the handle.
Figure 5
1. Bolt
g287668
3. Screw
(Figure
4).
(Figure
4).
(Figure
5) and
g287667
2. Handle
Removing the Bail
1.
Remove the bolts and nuts that secure the bail
to the handle mount. Remove the spacers, pins,
and spring
(Figure
1. Bail
2. Bolt
2.
Remove the bail from the handle mount.
3.
Remove the pins that secure the bail link to the
control shaft
(Figure
1. Bail link
3
6).
Figure 6
3. Spring
4. Nut
7) and remove the bail link.
Figure 7
2. Pins
g287719
g287666
Advertisement
