Table of Contents
Advertisement
Figure 24
4. Compress debris into the bags. With both hands, lift up
on the bag and unhook it from the retaining bracket.
Empty the bag. Repeat the procedure for the other bag.
5. Install the bags by sliding the bag frame hooks onto the
retaining brackets (Figure 25).
4
3
G005672
Figure 25
1. Bag
2. Bagger frame
6. Lower the bagger top onto the bags.
G005758
1
2
3. Retaining bracket
4. Bag frame hook
Clearing Obstructions from
the Bagger
1. Park the machine on a level surface and disengage the
blade control switch.
2. Move the motion control levers outward to the neutral
lock position, stop the engine, remove the key, set the
parking brake and wait for all moving parts to stop
before leaving the operating position.
3. Check the grass bags and empty them if they are full.
4. Remove and separate the discharge tube and chute
from the bagger top and mower. Using a stick or similar
object, carefully remove and clear the obstruction from
the mower, discharge tube, chute, and the bagger top.
5. After you remove the obstruction, install the complete
bagger system and resume operation.
Removing the Bagger
CAUTION
Failing to remove the front bagger weights
and operating the machine without the bagger
attachment may cause an unstable condition which
could result in a loss of control.
• Always remove the front weights when removing
the bagger attachment.
• Never operate the machine without the bagger
attachment and the front weights still installed.
The bagger can be removed by repeating the Setup sections
from all installed bagger related kits in reverse order. If
weights are installed, always remove the front bagger weights
when removing the bagger attachments.
Note: When switching back to side discharge mode, remove
the bagging baffle and install the original cutoff baffle that
came with the machine.
15
Advertisement
Table of Contents
