View] Menu - NEC PG-FPL2 User Manual

Caution The following is the correspondence between the [Erase] and [Program] commands
Disable Chip Erase
Disable Block Erase
Disable Program
Note Since the Erase command is invalid, the data that differs from the data already written in the
flash memory cannot be written.
4.4.3

[View] menu

Clicking the [View] menu displays the following pull-down menu.
This menu consists of commands for commands for setting whether to display the toolbar and status bar.
(1) [Toolbar] command
Checking the [Toolbar] command displays the toolbar. Unchecking the command hides the toolbar.
(2) [Status Bar] command
Checking the [Status Bar] command displays the status bar. Unchecking the command hides the status bar.
46
CHAPTER 4 OPERATION USING GUI SOFTWARE
when the security functions of a 78K0S/Kx1+ Series microcontroller are valid.
CHIP Erase Command
Invalid
Valid
Valid
Figure 4-15. [View] Menu
User's Manual U17307EJ2V0UM
Block Erase Command Program Command
Invalid
Invalid
Invalid
Note
Valid
Valid
Invalid