Chapter 5 Usage Example - NEC PG-FPL2 User Manual

Flash memory programmer

Hide thumbs

Table Of Contents

Table of Contents

This chapter explains a series of basic operations of the FPL2 with the GUI software, taking a case where the

PD78F9222 is used as the target device as an example. This chapter covers how to start the system, execute the

[Autoprocedure (EPV)] command, and program the target device.

Refer to CHAPTER 4 OPERATION USING GUI SOFTWARE for the other commands and applications.

O Series of operations described in this chapter

The conditions of the series of operations described in this chapter are as follows:

• Target system

Target device:

Voltage level:

Communication:

• FPL2

Parameter file:

Clock setting:

Port:

MODE switch:

Operation mode:

Write HEX:

Option setting:

(1) Installing the GUI software

Install the FPL2 GUI software in the host machine you are using, by referring to CHAPTER 3 SOFTWARE

INSTALLATION (if the software has not been installed yet).

(2) Installing the driver

Install the USB driver in the host machine you are using, by referring to CHAPTER 3 SOFTWARE

INSTALLATION (if the driver has not been installed yet).

(3) Installing the parameter file

Copy the parameter file for the

Download the parameter file from the following:

http://www.necel.com/micro/ods/eng/index.html (website in English)

http://www.necel.com/micro/ods/jpn/index.html (website in Japanese)