Table of Contents
Advertisement
CHAPTER 5 USAGE EXAMPLE
<6> Click OK . The GUI software sets the parameters.
When the settings are completed, the following screen is displayed.
Figure 5-6. Completion of Parameter Setting
"PRM File Read OK." is displayed
Parameters are updated.
(6) Selecting a user program
<1> Select [File] → [Load].
<2> Select a program file to be written to the target device, then click Open .
Figure 5-7. After Loading File
"Success read HEX file." is displayed.
Parameters are updated.
53
User's Manual U17307EJ2V0UM
Advertisement
Table of Contents
