Table of Contents
Advertisement
3.4
Uninstallation
3.4.1
Driver uninstallation
Uninstall the driver by manually deleting "NEC Electronics IE-PC Interface [PG-FPL2]" on the "Device Manager"
tab while the FPL2 is connected.
After deletion, Find New Hardware wizard may start. At this time, click Cancel.
3.4.2
GUI software uninstallation
The driver uninstallation program is contained in the CD-ROM (ID78K0S-QB Disk) included with the QB-
78K0SKX1MINI package (this program is used commonly as the installer).
Use the procedure below for driver uninstallation.
(1) When using Windows XP, log on as the computer administrator. When using Windows 2000, log on as the
Administrator.
(2) Insert the CD-ROM (ID78K0S-QB Disk) included with the QB-78K0SKX1MINI package into the CD-ROM drive.
(3) Double-click "My Computer", "CD-ROM", "PG-FPL2", and "SETUP" in that order. Double-click "setup.exe" in
the SETUP folder.
32
CHAPTER 3 SOFTWARE INSTALLATION
Figure 3-27. SETUP Folder
Double-click
User's Manual U17307EJ2V0UM
Advertisement
Table of Contents
