2.3
System Configuration and Components
The FPL2 system configuration is as given in the diagram below.
Host machine
USB cable
(Mini-B type)
Notes 1. Use the USB cable (Mini-B type) included with the QB-78K0SKX1MINI.
2. The FA adapter board is a product of Naito Densei Machida Mfg. Co., Ltd.
The FPL2 is connected to the host machine via the USB cable (Mini-B type). The FPL2 is connected to the user
system via the target cable. For the detailed specifications of the target cable and connector, refer to CHAPTER 6
CONNECTORS AND CABLES.
2.3.1
FPL2 display specifications, connector, and MODE switch settings
USB connector
12
CHAPTER 2 HARDWARE INSTALLATION
Figure 2-1. FPL2 System Configuration
ID78K0S-QB Disk
Target cable
Note 1
PG-FPL2
Figure 2-2. Layout Drawing of Connectors and LEDs
Power LED
User's Manual U17307EJ2V0UM
FPL2-FA
MODE switch
Status LED
Note 2
FA adapter
Target system
compatible with FP4
connector
Target system not
compatible with FP4
connector
Target cable connector