2.3
System Configuration and Components
The FPL3 system configuration is as given in the diagram below.
IECUBE Accessory Disk
Host machine
USB cable
(Mini-B type)
Notes 1. Use the USB cable (Mini-B type) included with the IECUBE.
2. The FA adapter board is a product of Naito Densei Machida Mfg. Co., Ltd.
The FPL3 is connected to the host machine via the USB cable (Mini-B type). The FPL3 is connected to the user
system via the target cable. For the detailed specifications of the target cable and connector, refer to CHAPTER 6
CONNECTORS AND CABLES.
2.3.1
FPL3 display specifications, connector, and MODE switch settings
USB connector
MODE
1 2 3
Power
Status
Power LED
12
CHAPTER 2 HARDWARE INSTALLATION
Figure 2-1. FPL3 System Configuration
Target cable
Note 1
PG-FPL3
Figure 2-2. Layout Drawing of Connectors and LEDs
MODE switch
Target
Target cable connector
Status LED
User's Manual U17454EJ1V0UM
FA adapter
FPL3-FA
MODE
1
2
VDD Target
3.3V
CLK
Target
8MHz
Note 2
Target system
compatible with FP4
connector
Target system not
compatible with FP4
connector
3
5V
16MHz