B meters IWM-LR3 User Manual page 5

.
Phase 2
Mount the locking screw and adhesive seal
CPR-M3-I meter GMDM-I | GMB-RP-I | GMB-I meter WDE-K50 meter
3. Joining procedure start-up
Let water flow in the meter, in order to make the rotating index spin.
To initialize the module and send joining requests to the desired network server, it is necessary to let the
inductive index of the dial rotate for +/-5 revolutions:
- On the GM and CPR-M3-I models, this corresponds to +/- 5 liters.
- On the WDE-K50 models, this corresponds to +/- 50 or 500 liters, depending on the K value set.
4. Verification of the module join procedure completion
Verify on the network server that the module has joined correctly.
If you require further support, please contact ticket@bmeters.com or your local distributor.
5
IWM-LR3 - IWM-LR4 User Manual v1.0