Physical Installation - B meters IWM-LR3 User Manual

2. Physical installation

When the meter has been digitally configured into your Lora network it is time to physically activate and
install it. Prior to the installation of the IWM-LR3 - IWM-LR4 unit on the meter, remember to remove the
protective metal sticker from the module.
You can then proceed with the module mounting on the meter.
Physical installation process
.
Phase 1
Mount IWM-LR3 - IWM-LR4 unit on the water meter
IWM-LR3
module
+
CPR-M3-I
meter
IWM-LR3
module
+
GMDM-I
GMB-RP-I
GMB-I
meter
IWM-LR4
module
+
WDE-K50
meter
IWM-LR3 - IWM-LR4
Step 1
Step 1
Step 1
Step 2
Step 2
Step 2
4
CLICK!
Step 3
CLICK!
Step 3
Step 3
User Manual v1.0