Programming Mode - Miele M 6160 TC Manual

DTD no. 24-6160
Note
The system lock is also deactivated after a break in the power supply.
4.2

Programming Mode

Initial requirements
A The appliance is switched on.
Accessing
A Press the
Acknowledgement indicator
The display shows P and
Options
Note
If no control is operated for 15 s, the display automatically goes back one menu
level without saving.
A Press the OK touchpad.
The display shows P1.
A Turn the right switch knob until the desired programming function (see 001
Table 1) is displayed.
A Press the OK touchpad.
The display shows S and the current setting.
A Turn the right switch knob until the desired setting is indicated in the display.
01.10.2014, US_am
touchpad.
, and flashes.
This information should not be duplicated or passed on without Miele approval. All rights reserved.
Descriptive Technical Documentation
001-9