001-36
Fig. 20: Control Electronic Screws
A Remove the control electronic from the electronics mounting bracket.
Note
To avoid the risk of incorrect connection, change plug contacts one by one when
replacing the control electronic; refer to D Layout of Electrical Components 2.
Danger!
In order to ensure that no microwave energy can escape after any repair work
has been completed, the microwave oven must be thoroughly checked for
microwave leaks using a suitable microwave leak detector (mat. no. 05595470).
Particular care should be taken around the door and the casing edges.
The maximum permissible value is 5mW/cm
measured at a distance of 5cm (2 inches) from the oven with a water load of
3
275cm
±15cm
This information should not be duplicated or passed on without Miele approval. All rights reserved.
3
(0.073 gallons ± 0.004 gallons).
Descriptive Technical Documentation
2
(32.3mW per square inch),
DTD no. 24-6160
01.10.2014, US_am