Miele M 6160 TC Manual page 54

001-38
Fig. 21
1
A Remove the screw, 001 Fig. 21, Pos. 1.
A Remove the door lock.
A Unclip the door safety switch and remove it, 001 Fig. 21.
Warning!
To ensure that no microwave energy can escape, the door must always be
carefully adjusted after reinstalling the door lock and/or hinges; see Door
Adjustment, 001 4.7.
Danger!
In order to ensure that no microwave energy can escape after any repair work
has been completed, the microwave oven must be thoroughly checked for
microwave leaks using a suitable microwave leak detector (mat. no. 05595470).
Particular care should be taken around the door and the casing edges.
The maximum permissible value is 5mW/cm
measured at a distance of 5cm (2 inches) from the oven with a water load of
3
275cm ±15cm
This information should not be duplicated or passed on without Miele approval. All rights reserved.
Door lock screw
3
(0.073 gallons ± 0.004 gallons).
Descriptive Technical Documentation
2
(32.3mW per square inch),
DTD no. 24-6160
01.10.2014, US_am