Miele M 6160 TC Manual page 46

001-30
Fig. 15
Warning!
Important during reassembly:
To ensure that the plastic is not damaged, take care that the 2 T20 screws
with thread for plastic (flat end) are located in the correct positions, 001 Fig.
14, Pos. 1.
Danger!
In order to ensure that no microwave energy can escape after any repair work
has been completed, the microwave oven must be thoroughly checked for
microwave leaks using a suitable microwave leak detector (mat. no. 05595470).
Particular care should be taken around the door and the casing edges.
The maximum permissible value is 5mW/cm
measured at a distance of 5cm (2 inches) from the oven with a water load of
3
275cm ±15cm
This information should not be duplicated or passed on without Miele approval. All rights reserved.
3
(0.073 gallons ± 0.004 gallons).
Descriptive Technical Documentation
2
(32.3mW per square inch),
DTD no. 24-6160
01.10.2014, US_am