Temperature Adjustment
Temporary Adjustment (OVERRIDE) – Press
the current set temperature. The set temperature will change
back to your programmed temperature a few hours later or
at the start of the next scheduled program event. OVERRIDE
will appear in the display during the entire override period.
Extended Adjustment (HOLD) – Press the HOLD button
to override all programming. HOLD will appear in the display.
You can continue to use the
current set temperature. Press HOLD again to resume the
program schedule. You can limit your hold time to 24-hours
by adjusting User Setting 6 in section 2.
NOTE: If your thermostat was configured to be
non-programmable, HOLD and OVERRIDE are not available.
User Manual
or
to adjust
or
buttons to adjust the
16
ROOM
FAN
AUTO
HEAT ON
OVERRIDE
PM
ROOM
HOLD
FAN
AUTO
HEAT ON
PM
SET
SET