fantastic furniture Bridge Manual page 9

Note: attach the back support panel (P8) on the side closest to the grooves.
7
Phillips Head
10 x Cam Nuts
Screwdriver
(H2)
Align and attach 3 x support panels (P6) and 1 x back support panel (P8) to the Left
panel (P4).
With assistance, align and attach the middle panel (P5) to the 3 x support
panels (P6) and 1 x back support panel (P8) as shown. Insert 10 x cam nuts
(H2) into the 4 x support panels (P6, P8), rotating the cam nuts so the
arrow points towards the incoming cam bolt. Secure the panels together by
tightening the cam nuts (H2) using a phillips head screwdriver.
8
10 x Cam Nuts
Phillips Head
(H2)
Screwdriver
Align and attach 3 x support panels (P6) and 1 x back support panel (P8)
to the middle panel (P5).
With assistance, align and attach the right panel (P3) to the 3 x support
panels (P6) and 1 x back support panel (P8) as shown. Insert 10 x cam nuts
(H2) into the 4 x support panels (P6, P8), rotating the cam nuts so the arrow
points towards the incoming cam bolt. Secure the panels together by
tightening the cam nuts (H2) using a phillips head screwdriver.
H2
P8
P6
P5
H2
P8
P5
P5
P6
P3
P4
P4
9