Page 4
Table Top(P1) 2 x Table Leg(P2) 12 x Bolts 12 x Washers Allen Key 4 x Levelling Feet (H1) (H2) (H3) (H4)
Page 5
12 x Bolts 12 x Washers (H1) (H2) 4 x Levelling Feet Allen Key (H4) (H3) Using 6 x Washers (H2) and 6 x Bolts (H1) secure the Table leg (P2) to the Table Top (P1) by tightening with Allen Key (H3) Repeat step to attach the second Table Leg (P2).
Seat(P1) Frame(P2) Seat(P1) Frame(P2) Hardware Pack 1 x Allen Key 4 x Bolts(60x45mm) 4x Washers (H1) (H2) (H3)
Page 11
4 x Bolts(60x45mm) 4 x Washers (H2) (H1) 1 x Allen Key (H3) Note: To make it is easier, place the frame over a table Align seat (P2) with holes in Metal Frame (P1). Attach seat(P2) to Metal Frame(P1) with 4xBolts(H1) and 4xWashers(H2).You may need to apply downward pressure to get the bolts to catch.Once all bolts are hand-tightened,use Allen Key(H3) to tighten firmly.