fantastic furniture Bridge Manual page 14

17
3 x Left 3 x Right
Runner Runner
(H15-3) (H15-4)
36 x Short Screws
Phillips Head
(H10)
Screwdriver
12 x Cam Nuts
(H2)
Secure 1 x left runner (H15-3) and 1 x right runner (H15-4) to the assembled drawer
using 6 x short screws (H10), tightening with the phillips head screwdriver.
Insert 2 x Cam Nuts(H2) into Drawer Support(P15) as shown.Rotate the
cam nuts so the arrows point towards the incoming cam bolts by tightening
the Cam Nuts(H2) with the Phillips Head Screwdriver
Repeat this step for the other 5 x drawers.
18
Slide the 6 x assembled drawers into dresser.
(H15-4)
(H2)
(H10)
(H10)
(H15-3)
Note: Ensure the wheels on the runners are
at the back of the drawer as shown.
X6
(H10)
(H10)
(H10)
14