fantastic furniture Bridge Manual page 13

15
24
Align and attach 1 x drawer left panel (P12) and 1 x drawer right panel (P13)
and 1xDrawer Support(P15) to 1 x drawer door (P9,P10). Ensure the grooves on the
drawer panels (P12, P13) align as shown.
Insert 4 x cam nuts (H2) into the panels (P12, P13), rotating the cam nuts so the
arrow points towards incoming cam bolts. Secure the panels by tightening the cam
nuts (H2) using a phillips head screwdriver.
Slide 1 x drawer bottom (P14) into the grooves on the panels (P12, P13) as shown.
Repeat this step for the other 5 x drawers.
16
36 x Long Screws
(H14)
Align 1 x drawer back (P11) to the assembled drawer. Ensure the pre-drilled holes on
the left and right drawer panels and Drawer support(P12, P13,P15) align with the
pre-drilled holes on the drawer back (P14). Secure together using
6 x long screws (H14), completely tightening with a phillips head screwdriver.
Repeat this step for the other 5 x drawers.
(H14)
(H14)
X6
(H14)
(P11)
(H14)
13