Troubleshooting; Technical Data; Ec Declaration Of Conformity - Power works PTF314 Instructions Manual

EN
screws and bolts, or speak to a person of an approved
service center.
5. Remove keys or tools used for maintenance.
6. Store the machine:
• indoors and out of children.
• prevent from inclement weather.
7

TROUBLESHOOTING

Problem
The motor shuts
down whilst work-
ing.
The machine
smokes during op-
eration.
The motor is on,
blades do not
move.
Too much noise
and/or vibration is
experienced while
working.
8

TECHNICAL DATA

Voltage
No load speed
Possible cause Solution
Make sure that
The battery pack is you tighlty instal-
not installed tight- led the battery
ly. pack in the ma-
chine.
The battery pack is Charge the battery
out of power. pack.
The machine has Do not use the ma-
damage. chine and speak to
service center.
1. Immediately
stop the ma-
chine.
The machine has
2. Remove the
damage.
battery.
3. Speak to serv-
ice center.
Do not use the ma-
The machine has
chine and speak to
damage.
service center.
Remove battery
The blades are then clear block-
blocked. age from the
blades.
1. Stop the ma-
chine.
2. Remove the
battery.
The parts are loos-
3. Inspect for
en.
damage.
4. Check and
tighten loose
parts.
Do not use the ma-
The parts have
chine and speak to
damage.
service center.
40V
3000
(±10%) /min
English
Blade speed
Blade length
Cutting capacity
Weight (without battery pack)
Measuered sound pressure level
Guaranteed sound power level
Vibration
Uncertainty
9 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name: GLOBGRO AB
Globe Group Europe
Address: Propellergatan 1, 211 15 Malmö, Sweden
Name and address of the person authorised to compile the
technical file:
Name: Peter Söderström
Address: Propellergatan 1, 211 15 Malmö, Sweden
Herewith we declare that the product
Category:
Model:
Serial number:
Year of Construction:
• is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
• is in conformity with the provisions of the following
other EC-Directives:
• 2014/30/EU
• 2000/14/EC & 2005/88/EC
• 2011/65/EU & (EU)2015/863
Furthermore, we declare that the following parts, clauses of
European harmonised standards have been used:
• EN 60745-1,EN 60745-2-15, EN ISO 10517,EN 55014-1,
EN 55014-2,EN ISO 3744,ISO 11094,IEC 62321-3-1,
IEC 62321-4,IEC 62321-5,IEC 62321-6,IEC 62321-7-1,
IEC 62321-7-2,IEC 62321-8
Measured sound pow-
er level:
6
3000
(±10%) /min
540 mm
27 mm
3.84 kg
80 dB(A),
K =3 dB(A)
PA
99 dB(A)
<2.5 m/s
1.5 m/s
Pole Hedge Trimmer
PTF314 (2300073)
See product rating label
See product rating label
L : 92.4 dB(A)
WA
2
2