Troubleshooting - Power works HT60B01PW Owner's Manual

TROUBLESHOOTING

PROBLEM
Motor fails to start
when switch trigger is
depressed.
Motor runs,but cutting
blades do not move.
Hedge trimmer
smokes during
operation.
Motor hums, blades
do not move.
POSSIBLE CAUSE
Battery is not secure.
Battery is not charged.
Hedger damaged. Do not use
hedge trimmer.
Hedger damaged. Do not use
hedge trimmer.
Debris or other may be
jamming the blades.
SOLUTION
To secure the battery pack, make sure
the latches on the top of the battery
pack snap into place.
Charge the battery pack according
to the instructions included with your
model.
Call for technical service.
Call for technical service.
Remove battery, clear debris blockage
from blades.
15