Use Of The Touch Timer 3 Keys - Bompani BO243OH/E Instructions For Use And Maintenance Manual

GB
USE OF THE TOUCH TIMER 3 KEYS (Fig.
13) The first start up
The numbers and the A letter on the display are blinking when the
oven is switched on for the first time, or after a power cut:the ap-
pliance cannot be operated in this condition.To set the hour and/or
to enable the appliance to operate press the M key for at least 2
seconds: the A letter turns off and the numbers now are steady on
the display.The dot (3) starts blinking: press the - or + key to set
the hour.The hour is accepted by the programmer just few second
after having released the key.
N.B. the appliance can be correctly used for cooking only when
you will see on the display the symbol (2).
The symbols on the display
A* Automatic programme is working.
1
(* in some models there is the writing " Auto
instead of A)
2
The appliance is ready for manual use (not auto)
When blinking, the programmer is in setting hour
3 •
mode.
4
Timer set.
Decreasing numbers when setting the timer.
5 -
Also for choose your desired sound level (3
levels available)
M "Mode" key to access the programming
6
options of the pro-gramme.
7 + Increasing numbers when setting the timer.
Timer
The purpose of the timer is just of a sound signal, which can be
set for a maximum time of 23h 59min. Once elapsed the set time,
the (4) symbol turns off and a sound signal is heard; this sound set
off automatically in 7min, or you can stop it by pressing any key of
the programmer. To set the timer press the M key for 2 seconds, or
anyway just to see the (4) symbol blinking. Set the timer by using
the + or - keys. Release the + or - key when you have matched
your desired time.In a few seconds the current time appears on
the display together with the (4) symbol.
The countdown starts immediately from now on.
Semi-automatic cooking
Cooking time
Once having selected a cooking function and set the desired
temperature, press the M key for a 2 seconds time to access the
programming mode. The (4) symbol appears. Release and press
again the M key.
On the display, the A symbol starts blinking and the "dur" writing
appears on the display, then it changes to 0*00.
Set the cooking time with the - or + keys. (max available time: 10h).
The selected time is automatically processed by the programmer
in a few seconds, or you can also touch the M key many times
just to see again the current time.The A and (2) symbols will be
on the display.
Once the set cooking time is finished, a sound will be heard and
the oven automatically switches off. Please see the following
paragraphs about how to disable the sound alarm and restarting
the oven.
End of cooking
Once having selected a cooking function and set the desired
temperature, touch the M key to access the programming mode
for at least 2 seconds.The (4) symbol switches on. Release and
touch again the M key.
On the display the A symbol starts blinking and the writing "dur"
appears. Touch again the M key. On the display the writing "End"
appears. The last one changes few seconds after with the symbol
0*00.
Set the end of cooking time with the keys - or +. (maximum avail-
able time: 10h 00m). The selected time is automatically processed
by the programmer in a few seconds, or you can also touch the
M key many time just to see again the current time. The cooking
immediately starts, while on the programmer display the current
time is shown again in a few seconds.
The A and (2) symbols will be on the display.
Once the set end of cooking time is finished, a sound will be heard
and the oven automatically switches off. Please see the following
paragraphs about how to disable the sound alarm and restarting
the oven.
Automatic cooking
Set a cooking time following the instructions on the cooking time
paragraph, then set the end of cooking time following the instruc-
tions on the previous paragraph.(maximum available end of
cooking time 24h).
The oven automatically switches on at a determined time which is
the difference between the end of cooking time and the cooking
time.
During the waiting time before cooking, which goes from the oven
start to the heating, on the display appears the A symbol to show
that an automatic program is on and the current time. The oven
on is marked by the (2) symbol.
Once the set end of cooking time is finished, a sound will be heard
and the oven automatically switches off. Please see the following
paragraphs about how to disable the sound alarm and restarting
the oven.
How to disable the sound alarm
To disable the sound just touch one of the keys.
Operating again the oven
Once a semi-automatic or automatic cooking has expired, on the
display appear the current time and the blinking A symbol. In this
condition, the heating elements and the light bulb of the oven are
disabled.
To enable again the oven, just touch and keep the M key up to
see the symbol (2) on the display and the A symbol disappears.
THE OTHERS PROGRAMMER FUNCTIONS
How to delete a cooking time - Semi- automatic or Automatic
To delete a semi-automatic or automatic cooking program, with the
A symbol on, touch together the - and + keys for a least 2 seconds
or anyway up to see the (2) symbol and the disabling of A symbol.
How to delete the countdown timer
To delete the counting of the timer, which symbol is (4), touch the
M key for at least 2 seconds or anyway up to see the (4) symbol
blinking.
Touch together the - and + keys.
Checking the function settings
The set or remaining time of every cooking function of the program-
mer can be recalled to the display by entering in program mode
with the M key. Touch and keep the M key for almost 2 seconds
or anyway up to see the (4) symbol. The remaining time appears
on the display, or a series of zero numbers if the timer is disabled.
Touch again the M key. On the display appears the "dur" writing,
then alternately the remaining time or a series of zero number
(disable timer).
By touching again the M key, the end of cooking time appears
together with the "End" writing.
32
For the user