RadioLink T8FB Instruction Manual page 8

Quick press the ID SET switch two times within 1 second, the signal is changed from
PWM to S-BUS&PPM. The red LED indicates the PWM and blue/purple indicates
S-BUS&PPM.
How to match code with transmitter:
1. Put the transmitter and the receiver close to each other within 1 meters.
2. Turn on the transmitter, then power on the R8EF.
3. There is a black button on the R8EF, press the binding button twice in two seconds
and release, receiver light start blinking, after about blinking 8 times, match code
success then receiver signal LED always on!
Specification:
1) Channels: 8 channels
2) Working voltage: 4.8-10V
3) Working current: 30mA（input voltage: 5V）
4) Size: 48.5*21*11mm
5) Weight: 7g
6) 2048 section precision, 0.5us per section, servo anti-shake rudder.
7) Control distance: about 500m ground and 1000m air, actually control distance
depends on the environment.
MINI Receiver R8FM
Radiolink R8FM, 2.4G 8 channels receiver, S-BUS and PPM signal possible working
at the same time, use for Radiolink transmitter T8FB, supper mini size, is designed for
racing drone.
S-BUS&PPM signal change:
Quick press the ID SET switch two times within 1 second, the signal is changed from
PPM to S-BUS. The red LED indicates the PPM and blue/purple indicates S-BUS.
Specification:
7