Kaba Mas AUDITCON 2 Series Manual
Hide thumbs
Also See for AUDITCON 2 Series:
- Manual (2 pages) ,
- Installation instructions (2 pages) ,
- Installation manual
Advertisement
M
252 & 552
ODELS
S
M
O
UPER
ASTER
PERATIONS
The following instructions cover Model 252 & 552 Super Master Operations. The lock is
shipped with a default factory Super Master User PIN that can be set to a different value
when the lock is in factory mode. Once the Super Master User PIN is set, the Super
Master User combination can only be used to shelve and unlock the lock in the event that
the Manager User combination is lost. Once set, the Super Master User PIN can be
changed any time the lock is in shelved mode.
WARNING: The setting of the Super Master User PIN is optional, however, if you
do not set the Super Master User PIN before setting the Master User PIN, the
Super Master shelving capability will be permanently lost.
Important Note: The lock must be manually powered before each operation by
briskly turning the dial back and forth
SET SUPER MASTER USER PIN
The lock must be in factory mode.
Note: The default factory PIN assigned to the Super Master User is "120943". This
default PIN must be changed before the Super Master User combination can be used to
shelve the lock.
1.
Press # and then 0.
G
R
2.
Enter the two-digit Super Master ID 00 followed by the default factory Super Master
User PIN "120943."
G
R
3.
Enter the two-digit Super Master ID 00 followed by any six-digit PIN other than
"120943".
G
R
4.
Enter the two-digit Super Master ID 00 followed by the new six-digit PIN entered in
Step 5 again for verification. The new Super Master User combination is now set.
5.
Record the combination and store it in a secure place.
CHANGE SUPER MASTER USER PIN
A Super Master User PIN can only be changed while the lock is shelved.
Warning:
Do not change the Super Master User PIN to the factory default of
"120943" as this will permanently disable the Super Master User capabilities.
1.
Press # and then 0.
G
R
2.
Enter 00 followed by the current Super Master User PIN.
3.
Enter 00 followed by the new Super Master User PIN.
4.
Enter 00 followed by the new Super Master User PIN again for verification.
Document Number 3057.025 Rev. C - 09/10
®
AUDITCON
2 SERIES
.
G
R
G
R
G
M
252 & 552
ODELS
S
M
UPER
The following instructions cover Model 252 & 552 Super Master Operations. The lock is
shipped with a default factory Super Master User PIN that can be set to a different value
when the lock is in factory mode. Once the Super Master User PIN is set, the Super
Master User combination can only be used to shelve and unlock the lock in the event that
the Manager User combination is lost. Once set, the Super Master User PIN can be
changed any time the lock is in shelved mode.
WARNING: The setting of the Super Master User PIN is optional, however, if you
do not set the Super Master User PIN before setting the Master User PIN, the
Super Master shelving capability will be permanently lost.
Important Note: The lock must be manually powered before each operation by
briskly turning the dial back and forth
SET SUPER MASTER USER PIN
The lock must be in factory mode.
Note: The default factory PIN assigned to the Super Master User is "120943". This
default PIN must be changed before the Super Master User combination can be used to
shelve the lock.
1.
Press # and then 0.
2.
Enter the two-digit Super Master ID 00 followed by the default factory Super Master
User PIN "120943."
3.
Enter the two-digit Super Master ID 00 followed by any six-digit PIN other than
"120943".
4.
Enter the two-digit Super Master ID 00 followed by the new six-digit PIN entered in
Step 5 again for verification. The new Super Master User combination is now set.
5.
Record the combination and store it in a secure place.
CHANGE SUPER MASTER USER PIN
A Super Master User PIN can only be changed while the lock is shelved.
Warning:
Do not change the Super Master User PIN to the factory default of
"120943" as this will permanently disable the Super Master User capabilities.
1.
Press # and then 0.
2.
Enter 00 followed by the current Super Master User PIN.
3.
Enter 00 followed by the new Super Master User PIN.
4.
Enter 00 followed by the new Super Master User PIN again for verification.
R
Document Number 3057.025 Rev. C - 09/10
AUDITCON
O
ASTER
PERATIONS
.
G
R
G
R
G
R
G
R
®
2 SERIES
G
R
G
R
G
R
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Kaba Mas AUDITCON 2 Series
Summary of Contents for Kaba Mas AUDITCON 2 Series
- Page 1 ® ® AUDITCON 2 SERIES AUDITCON 2 SERIES 252 & 552 252 & 552 ODELS ODELS UPER ASTER PERATIONS UPER ASTER PERATIONS The following instructions cover Model 252 & 552 Super Master Operations. The lock is The following instructions cover Model 252 & 552 Super Master Operations. The lock is shipped with a default factory Super Master User PIN that can be set to a different value shipped with a default factory Super Master User PIN that can be set to a different value when the lock is in factory mode.
- Page 2 Enter 00 followed by the default factory PIN “120943” again for verification. Enter 00 followed by the default factory PIN “120943” again for verification. © 2005-2010 Kaba Mas LLC. All rights reserved. © 2005-2010 Kaba Mas LLC. All rights reserved.
Need help?
Do you have a question about the AUDITCON 2 Series and is the answer not in the manual?
Questions and answers
How many user codes can be added to this lock. Does the lock have capability to set up dual control requirements?
The Kaba Mas AUDITCON 2 Series lock supports up to 99 user codes and it does support dual control requirements.
This answer is automatically generated
Cannot reset lock from shelved. Need to default lock
To reset the Kaba Mas AUDITCON 2 Series lock to factory default settings, follow these steps:
1. Ensure the lock is manually powered by briskly turning the dial back and forth.
2. Enter the six-digit Super Master User Combination.
3. Use the Super Master User Combination to reset the lock to the factory default combination (502550).
Important Notes:
- The Super Master User Combination must be set before changing any user combinations, or the reset capability will be lost.
- Once set, the Super Master User Combination can never be changed.
If the Super Master User Combination was not set before modifying user combinations, the factory reset option is permanently unavailable.
This answer is automatically generated