Reporting The Urine Color; Setting The Sequence Number - Bayer HealthCare CLINITEK 50 User Manual

Reporting the Urine
Color
Press the key under the
1
word SET.
Press MORE, then press
2
COLOR. Press the YES or NO
key to make your selection.
Press EXIT as needed.
3
Setting the Sequence
Number
If you want to have the
1
sequence number appear, press
the key under the word SET.
Press MORE, then press
2
SEQ#.
Press YES to use sequence
3
numbers (or press NO if you
don't want them displayed).
Press EXIT as needed.
4
Color will be reported
automatically when using Bayer
Reagent Strips that include the
leukocyte test pad if this option
is set to YES. If there is no
leukocyte pad, lines for manual
entry of the color and clarity are
printed.
Color results reported
by the instrument may be
different from the color seen
visually. This is because of the
inherent differences between the
human eye and the optical
system of the instrument.
The sequence number
will not be displayed or printed
unless you change this option.
If you are already using
sequence numbers and the
number is greater than 001,
you will first be given the option
of setting it to 001.
11