Table of Contents
Advertisement
9150-0125-01 R-1
•
TRACK_NOTIFY_FLAGS_IN_GEOFENCE = 32
•
TRACK_NOTIFY_FLAGS_OUT_GEOFENCE = 64
•
TRACK_NOTIFY_TRACK_STATE_CHANGED = 128
7.6.1 SET TRACK EVENTS NOTIFY FLAGS VIA NUS, UART
AT+TNSF = < TrackNotifyFlags>
7.6.2 READ TRACK EVENTS NOTIFY FLAGS VIA NUS, UART
AT+TNSF? Response
+ TNSF: < TrackNotifyFlags>
7.6.3 Set Track Events Notify Flags via Configuration Service
AT+TANSF = < TrackNotifyFlags>
7.6.4
Read Track Events Notify Flags via Configuration Service
AT+TANSF?
Response
+ TNSF: < TrackNotifyFlags>
Example:
•
To receive Track in geofence and out geofence event notification, the valid command to activate notification AT+TNSF = 6.
•
To receive all Track event notifications, the valid command to activate all notifications AT+TNSF = 96.
•
To receive all Track event notifications over configuration service, the valid command to activate all notifications AT+TANSF
= 255.
•
AT+TNSF = 256 will return ERROR.
•
Configuring any reserved notification will return error.
7.7 SYSTEM OTA EVENT NOTIFICATION SETTINGS
Supported OTA Events notifications code <OTAEventNotifyFlags>
•
OTA_EVENT_NOTIFY_FLAGS_RESERVED_1 = 1
•
OTA_EVENT_NOTIFY_FLAGS_RESERVED_2 = 2
•
OTA_EVENT_NOTIFY_FLAGS_RESERVED_3 = 4
•
OTA_EVENT_NOTIFY_FLAGS_INPUT_COUNT_MODULO = 8
•
OTA_EVENT_NOTIFY_FLAGS_INPUT_ACCUMULATED_MODULO = 16
•
OTA_EVENT_NOTIFY_FLAGS_INPUT_TRANSITION = 32
•
OTA_EVENT_NOTIFY_FLAGS_INPUT_TRANSITION_HYSTERESIS = 64
•
OTA_EVENT_NOTIFY_FLAGS_CHANGED_STATE = 128
•
OTA_EVENT_NOTIFY_FLAGS_POWER_ON_DELAY = 256
•
OTA_EVENT_NOTIFY_FLAGS_COUNT_ROLLOVER = 512
•
OTA_EVENT_NOTIFY_FLAGS_ACCUMULATED_ROLLOVER = 1024
7.7.1 SET OTA EVENTS NOTIFY FLAGS VIA NUS, UART.
AT+CANSF = < OTAEventNotifyFlags >
7.7.2 READ OTA EVENTS NOTIFY FLAGS VIA NUS, UART.
AT+CANSF?
Response
+ CANSF: < OTAEventNotifyFlags >
ST150M User Manual
Confidential & Proprietary Information
34
Advertisement
Table of Contents
