Table of Contents
Advertisement
9150-0125-01 R-1
11. ORDERING INFORMATION/DEVICE MARKINGS/
ACTIVATION INFORMATION
11.1 DEVICE MARKING
The ST150 Module is marked with a PCB label as shown in the following figure:
1. 12 Digit UID. 12th digit is a Luhn checksum of the previous 11 digits used to prevent incorrect data entry during
activation/device management
2. Hardware SKU – Used by Globalstar to identify different base hardware configurations
3. Product SKU – Used by Globalstar to identify different products using a specific Hardware SKU as the base module
4. Globalstar Part Number
5. Scannable DataMatrix Code – Contains product information in the format <UID>,<Hardware SKU ID>,<Hardware SKU
Sring ID>,<Product SKU ID>,<Product SKU String ID>,<Globalstar Part Number>
11.2 BOX LABELS
The following Figures show the box labels and packing slips used for the ST150 Module:
1
2
3
4
FIGURE 16 – PCB LABEL
FIGURE 17 – BOX LABEL AND PACKING SLIP
5
Advertisement
Table of Contents
