Table of Contents
Advertisement
9150-0125-01 R-1
7.7.3 SET OTA EVENTS NOTIFY FLAGS VIA CONFIGURATION SERVICE
AT+CCNSF = < OTAEventNotifyFlags >
7.7.4 READ OTA EVENTS NOTIFY FLAGS VIA CONFIGURATION SERVICE
AT+CCNSF?
Response
+ CCNSF: < OTAEventNotifyFlags >
Example:
•
To receive count modulus and input transition event notification, the valid command to activate notification AT+CANSF = 40
(32+8).
•
To receive all system OTA event notifications, the valid command to activate all notifications AT+CANSF = 2047.
•
To receive all system OTA event notifications over configuration service, the valid command to activate all notifications
AT+CCNSF = 2047.
•
AT+CANSF = 2048, AT+CANSF = 1 , AT+CANSF = 2, AT+CANSF = 4 , AT+CANSF = 3 etc will return ERROR i.e.
configuring any reserved notification will return error.
7.8 GPS EVENT NOTIFICATION SETTINGS
Supported GPS Event notifications code < GPSNotifyFlags>
•
GPS_NOTIFY_FLAGS_FIX_STARTED = 1
•
GPS_NOTIFY_FLAGS_FIX_COMPLETED_SUCCESS = 2
•
GPS_NOTIFY_FLAGS_FIX_COMPLETED_ERROR = 4
•
GPS_NOTIFY_FLAGS_HARDWARE_ERROR = 8
•
GPS_NOTIFY_FLAGS_CHANGE_IN_LOCATION_DETECTED = 16
•
GPS_NOTIFY_FLAGS_NMEA_SENTENCE = 32
•
GPS_NOTIFY_TIMEOUT_WITH_FIX = 64
•
GPS_NOTIFY_2D_FIX_ACHIEVED = 128
•
GPS_NOTIFY_3D_FIX_ACHIEVED = 256
•
GPS_NOTIFY_GPS_POSITION_MANUALLY_SET = 512
•
GPS_NOTIFY_FLAGS_GEOFENCE_EVENT_DETECTED = 1024
•
GPS_NOTIFY_FLAGS_GEOFENCE_RENTRY_DETECTED = 2048
7.8.1 SET GPS NOTIFY FLAGS VIA NUS, UART.
AT+GNSF = < GPSNotifyFlags>
7.8.2 READ GPS NOTIFY FLAGS VIA NUS, UART.
AT+GNSF?
Response
+ GNSF: < GPSNotifyFlags>
7.8.3 SET GPS NOTIFY FLAGS VIA CONFIGURATION SERVICE
AT+GANSF = < GPSNotifyFlags>
ST150M User Manual
Confidential & Proprietary Information
35
Advertisement
Table of Contents
