Priority Scan Setting; Tx Delay On/Off Setting - Midland PL-5161 Operating Instructions Manual

X.9.6 Priority Scan Setting
In this mode, if MODE button
or PTT Button is pressed,
Priority Scan is disabled and
exits to receiving stand-by
mode.
Under the above mode, press Up/Down buttons to select desired priority channel and then press Mode
button or
PTT button to set. The radio will then save selection and exit to receiving stand-by mode.
X.10

TX DELAY ON/OFF SETTING

Under the above mode, press Up/Down buttons to select On or Off and then press Mode button or
PTT button to set. The radio will then save selection and exit to receiving stand-by mode.
** Tx Delay : This function is to remove Squelch tail of receiving Radio by creating a CTCSS Turn-Off
(No Tone) during 180msec after TX is completed if TX tone option is set by CTCSS
Option.
30
Mode
H
BEE
H
Mode
VI
Mode
H
BEE
Up/Down buttons
H
BEE
BEEP
Up/Down buttons
BEEP
H
BEE
H
BEE
H
H