X.9.4 Scan Delay Time Setting
Under the above mode, press Up/Down buttons to select desired time and then press Mode button or PTT button to
set. The radio will then save selection and exit to receiving stand-by mode.
Scan Delay Time : In SCAN, this is the stand-by time to stay on the channel after the receiving signal stops or after
transmitting.
X.9.5 Look Back Time Setting
Under the above mode, press Up/Down buttons to select desired time and then press Mode button or
PTT button to set. The radio will then save selection and exit to receiving stand-by mode.
** Look Back Time : In Priority SCAN mode, this is the interval time to check the priority channel when
29
Mode
V
BEE
MOde
H
BEE
the radio receives a signal on a non- priority channel.
Mode
IV
BEE
Mode
H
BEE
H
BEE
Up/Down buttons
H
BEE
H
BEE
Up/Down buttons
H
BEE