Tot Penalty Setting; Busy Channel Lock Out On/Off Setting - Midland PL-5161 Operating Instructions Manual

X.6

TOT PENALTY SETTING

In this mode, if MODE button
or PTT Button is pressed,
TOT penalty function is
disabled and exits to receiving
stand-by mode.
Under the above mode, press Up/Down buttons to select desired time and then press Mode button or
PTT button to set T-O-T penalty time. The radio will then save selection and exit to receiving stand-by
mode.
** TOT Penalty : If the radio transmits over a set time, it will beep an T-O-T error tone and the radio
X.7

BUSY CHANNEL LOCK OUT ON/OFF SETTING

Under the above mode, press Up/Down buttons to select On or Off and then press Mode button or
PTT button to set Busy Channel Lock Out. The radio will then save selection and exit to receiving stand-by
mode.
.
** Busy Channel Lock Out : If the channel is busy, it inhibits transmission.
26
Mode
H
BEE
will only receive a signal for the penalty time. (TX inhibited for this time.)
H
BEEP
H
BEE
Up/Down buttons
H
BEE
Mode
Mode
H
BEEP
Up/Down buttons
H
BEEP
H
BEE
H
BEE