Ix.12 Invert Dcs Tone Select; Ix.13 Tx Output Power High/Low Setting - Midland PL-5161 Operating Instructions Manual

IX.12 INVERT DCS TONE SELECT

Mode
Under the above mode, press Up/Down buttons to select desired DCS Tone and then press Mode button or PTT
button to set RX or TX tone option. The radio will then save selection and exit to receiving stand-by mode.

IX.13 TX OUTPUT POWER HIGH/LOW SETTING

Under the above mode, press Up/Down buttons to select desired Output Power and then press Mode button
Or
PTT button to set the output power to 1W or 5W for the current channel. The radio will then save selection and exit
to receiving stand-by mode.
20
H
BEEP
H
Mode
BEEP
Mode
BEEP
Up/Down buttons
BEEP
H
BEEP
Up/Down buttons
H
BEEP
H
H