Product Dimensions; How To Use The Inlet/Outlet Fitting Retention Clips - 3M SF1 Series Instruction Manual

Product Dimensions

How to Use the Inlet/Outlet Fitting Retention Clips

This product is outfitted with inlet/outlet fittings. The fittings can be attached or removed from the system
without tools. Retention clips are semi-circular in shape with three internal tabs, bottom, center and top. Tab interlaces
with windows in the manifold head near each connection port. Clip is flexible and easily assembled following these
instruction and illustrations.
1. Insert fitting into manifold.
2. With fitting inserted into manifold port, snap clip into place beginning at the bottom window
3. Push center tab into center window.
4. Finally push top tab into top window.
Step 1
17 5/16"
(44.0 cm)
Minimum of 3" (7.6 cm)
For Cartridge Change
Step 2
4
18 1/16"
(45.9 cm)
Step 4
Step 3
5 7/16"
(13.8 cm)