Microtek ScanMaker V6USL Installation Manual page 4

d) Caere OmniPage Limited Edition, your OCR
text-scanning software: During installation of
OmniPage Limited Edition, you will be asked to
select your "Source". Make sure Microtek
ScanWizard (32bit) is selected. At the end of
installing OmniPage Limited Edition, select
"Return to Windows" (not "Restart your
computer").
e) Adobe Acrobat Reader. This is your
documentation reader for reading and printing
the manuals on the CD-ROM.
5. After all the software has been installed, click
Exit at the bottom left of the Microtek Software
Installer screen.
6. Install Adobe Photoshop LE. Insert the Adobe
Photoshop LE CD-ROM into your CD-ROM
drive. Double-click the following in successive
order: "My Computer" in your Windows
desktop, the "Photosle" CD-ROM icon, the folder
named "English", the folder called "Photosle", the
folder called "Disk 1", and finally the "Setup.exe"
icon to start installation. Follow the on-screen
instructions until Photoshop LE is installed.
7. Restart your computer at the end of all software
installation.
S C S I I n s t a l l a t i o n o n t h e P C
4 . T e s t y o u r s c a n n e r
1. Click Start, Settings, and select Control Panel.
2. Double-click Imaging Device or Microtek
3. In Windows, go to "Start, Programs, Microtek
4. Place your document face down on the scanner
6. A preview of your image will be displayed in the
4
Double-click the System icon in Control Panel,
then select Device Manager from the top.
scanner. Verify that your scanner is listed here.
Click "OK" to close all dialog boxes.
ScanWizard', and select Scanner Test. When
started successfully, the screen below appears.
Click the Flatbed button.
glass, and click OK in the dialog box.
Top of document faces
front of the scanner.
Microtek ScanTest window. Click OK, and exit
Microtek ScanTest; you are now ready to scan.
Detected
scanner
Detected
Interface
Click the
"Flatbed"
button